011-49851163
8750500323
support@bluespaceinnovations.in
A 1M Ohm 1/4W 5% Through Hole Resistor is a precision electronic component widely used in a variety of circuit applications, providing a fixed electrical resistance. Here’s a detailed breakdown of its characteristics:
Resistance Value (1M Ohm): This resistor has a resistance of 1,000,000 ohms (1MΩ). The resistance determines the amount of current that flows through a circuit when a voltage is applied, based on Ohm's law (V = IR). A 1MΩ resistor limits the current flow significantly, making it ideal for high-impedance applications.
Power Rating (1/4W): The power rating of 1/4 watt (0.25W) indicates the maximum amount of power the resistor can safely dissipate without being damaged. This power rating is typical for resistors used in general-purpose low-power circuits, such as signal processing or analog devices.
Tolerance (5%): The 5% tolerance means that the actual resistance value can vary by ±5% from the stated nominal value of 1MΩ. This is a standard tolerance, indicating moderate precision, suitable for applications where slight variations in resistance are acceptable.
Through Hole Mounting: The through hole configuration refers to the type of mounting used for the resistor. It has two metal leads that pass through holes on a printed circuit board (PCB), which are then soldered into place. This mounting style is often chosen for its durability and ease of repair, particularly in prototype or low-volume production environments.
Applications: 1MΩ resistors are frequently used in voltage dividers, signal conditioning circuits, filters, and other electronic circuits where precision resistance is needed. They are often found in audio equipment, microcontroller circuits, sensors, and signal processing applications.
Material and Construction: These resistors are typically made from carbon film, metal oxide, or metal film, with the construction providing a balance between cost and performance. The material choice affects the temperature coefficient and stability of the resistor.
Overall, the 1M Ohm 1/4W 5% Through Hole Resistor is a versatile, widely used component for various electronics projects where a stable and reliable fixed resistance is required.
₹ 40.50 ₹ 45.00
₹ 191.25 ₹ 225.00
₹ 1,800.00 ₹ 2,250.00
A 1M Ohm 1/4W 5% Through Hole Resistor is a precision electronic component widely used in a variety of circuit applications, providing a fixed electrical resistance. Here’s a detailed breakdown of its characteristics:
Resistance Value (1M Ohm): This resistor has a resistance of 1,000,000 ohms (1MΩ). The resistance determines the amount of current that flows through a circuit when a voltage is applied, based on Ohm's law (V = IR). A 1MΩ resistor limits the current flow significantly, making it ideal for high-impedance applications.
Power Rating (1/4W): The power rating of 1/4 watt (0.25W) indicates the maximum amount of power the resistor can safely dissipate without being damaged. This power rating is typical for resistors used in general-purpose low-power circuits, such as signal processing or analog devices.
Tolerance (5%): The 5% tolerance means that the actual resistance value can vary by ±5% from the stated nominal value of 1MΩ. This is a standard tolerance, indicating moderate precision, suitable for applications where slight variations in resistance are acceptable.
Through Hole Mounting: The through hole configuration refers to the type of mounting used for the resistor. It has two metal leads that pass through holes on a printed circuit board (PCB), which are then soldered into place. This mounting style is often chosen for its durability and ease of repair, particularly in prototype or low-volume production environments.
Applications: 1MΩ resistors are frequently used in voltage dividers, signal conditioning circuits, filters, and other electronic circuits where precision resistance is needed. They are often found in audio equipment, microcontroller circuits, sensors, and signal processing applications.
Material and Construction: These resistors are typically made from carbon film, metal oxide, or metal film, with the construction providing a balance between cost and performance. The material choice affects the temperature coefficient and stability of the resistor.
Overall, the 1M Ohm 1/4W 5% Through Hole Resistor is a versatile, widely used component for various electronics projects where a stable and reliable fixed resistance is required.
A 1M Ohm 1/4W 5% Through Hole Resistor is a precision electronic component widely used in a variety of circuit applications, providing a fixed electrical resistance. Here’s a detailed breakdown of its characteristics:
Resistance Value (1M Ohm): This resistor has a resistance of 1,000,000 ohms (1MΩ). The resistance determines the amount of current that flows through a circuit when a voltage is applied, based on Ohm's law (V = IR). A 1MΩ resistor limits the current flow significantly, making it ideal for high-impedance applications.
Power Rating (1/4W): The power rating of 1/4 watt (0.25W) indicates the maximum amount of power the resistor can safely dissipate without being damaged. This power rating is typical for resistors used in general-purpose low-power circuits, such as signal processing or analog devices.
Tolerance (5%): The 5% tolerance means that the actual resistance value can vary by ±5% from the stated nominal value of 1MΩ. This is a standard tolerance, indicating moderate precision, suitable for applications where slight variations in resistance are acceptable.
Through Hole Mounting: The through hole configuration refers to the type of mounting used for the resistor. It has two metal leads that pass through holes on a printed circuit board (PCB), which are then soldered into place. This mounting style is often chosen for its durability and ease of repair, particularly in prototype or low-volume production environments.
Applications: 1MΩ resistors are frequently used in voltage dividers, signal conditioning circuits, filters, and other electronic circuits where precision resistance is needed. They are often found in audio equipment, microcontroller circuits, sensors, and signal processing applications.
Material and Construction: These resistors are typically made from carbon film, metal oxide, or metal film, with the construction providing a balance between cost and performance. The material choice affects the temperature coefficient and stability of the resistor.
Overall, the 1M Ohm 1/4W 5% Through Hole Resistor is a versatile, widely used component for various electronics projects where a stable and reliable fixed resistance is required.
Mail: support@bluespaceinnovations.in
Call on: 011-49851163
Whatsapp us 8750500323
