011-49851163
8750500323
support@bluespaceinnovations.in
The 82K Ohm 1/4W 5% Through Hole Resistor is a standard fixed resistor commonly used in electronic circuits. It has a resistance value of 82,000 Ohms (82KΩ), which means it restricts the flow of electrical current, making it an essential component for voltage division, current limiting, and signal processing.
The 1/4W (or 0.25W) rating indicates that it can safely dissipate up to 1/4 watt of power. This makes it ideal for low-power applications, and its power rating ensures it operates within safe thermal limits under typical operating conditions. Exceeding the power rating may cause overheating and potential damage to the component.
The 5% tolerance specifies the allowable variance in the resistance value. In this case, the actual resistance may vary by up to 5% above or below the nominal value of 82K Ohms. This tolerance is standard for many commercial resistors and ensures that the resistor performs within an acceptable range for most general-purpose electronic applications.
The through-hole configuration refers to the physical mounting method of the resistor. It has wire leads that go through holes in a printed circuit board (PCB), allowing the resistor to be soldered on both sides of the board. Through-hole resistors are known for their durability and ease of handling in manual assembly, making them widely used in prototyping, hobbyist projects, and consumer electronics.
This type of resistor is commonly used in a variety of applications, such as signal filtering, voltage regulation, timing circuits, and in biasing circuits for transistors or other components. The 82KΩ value is often selected when a particular resistance is needed to set specific conditions in analog or digital circuits.
In summary, the 82K Ohm 1/4W 5% Through Hole Resistor is a widely-used component offering a reliable and cost-effective solution for controlling current in electronic circuits, with a resistance value of 82,000 ohms, a power rating of 0.25 watts, and a tolerance of 5%. Its through-hole mounting design makes it suitable for a broad range of electronic applications.
₹ 22.50 ₹ 25.00
₹ 106.25 ₹ 125.00
₹ 1,000.00 ₹ 1,250.00
The 82K Ohm 1/4W 5% Through Hole Resistor is a standard fixed resistor commonly used in electronic circuits. It has a resistance value of 82,000 Ohms (82KΩ), which means it restricts the flow of electrical current, making it an essential component for voltage division, current limiting, and signal processing.
The 1/4W (or 0.25W) rating indicates that it can safely dissipate up to 1/4 watt of power. This makes it ideal for low-power applications, and its power rating ensures it operates within safe thermal limits under typical operating conditions. Exceeding the power rating may cause overheating and potential damage to the component.
The 5% tolerance specifies the allowable variance in the resistance value. In this case, the actual resistance may vary by up to 5% above or below the nominal value of 82K Ohms. This tolerance is standard for many commercial resistors and ensures that the resistor performs within an acceptable range for most general-purpose electronic applications.
The through-hole configuration refers to the physical mounting method of the resistor. It has wire leads that go through holes in a printed circuit board (PCB), allowing the resistor to be soldered on both sides of the board. Through-hole resistors are known for their durability and ease of handling in manual assembly, making them widely used in prototyping, hobbyist projects, and consumer electronics.
This type of resistor is commonly used in a variety of applications, such as signal filtering, voltage regulation, timing circuits, and in biasing circuits for transistors or other components. The 82KΩ value is often selected when a particular resistance is needed to set specific conditions in analog or digital circuits.
In summary, the 82K Ohm 1/4W 5% Through Hole Resistor is a widely-used component offering a reliable and cost-effective solution for controlling current in electronic circuits, with a resistance value of 82,000 ohms, a power rating of 0.25 watts, and a tolerance of 5%. Its through-hole mounting design makes it suitable for a broad range of electronic applications.
The 82K Ohm 1/4W 5% Through Hole Resistor is a standard fixed resistor commonly used in electronic circuits. It has a resistance value of 82,000 Ohms (82KΩ), which means it restricts the flow of electrical current, making it an essential component for voltage division, current limiting, and signal processing.
The 1/4W (or 0.25W) rating indicates that it can safely dissipate up to 1/4 watt of power. This makes it ideal for low-power applications, and its power rating ensures it operates within safe thermal limits under typical operating conditions. Exceeding the power rating may cause overheating and potential damage to the component.
The 5% tolerance specifies the allowable variance in the resistance value. In this case, the actual resistance may vary by up to 5% above or below the nominal value of 82K Ohms. This tolerance is standard for many commercial resistors and ensures that the resistor performs within an acceptable range for most general-purpose electronic applications.
The through-hole configuration refers to the physical mounting method of the resistor. It has wire leads that go through holes in a printed circuit board (PCB), allowing the resistor to be soldered on both sides of the board. Through-hole resistors are known for their durability and ease of handling in manual assembly, making them widely used in prototyping, hobbyist projects, and consumer electronics.
This type of resistor is commonly used in a variety of applications, such as signal filtering, voltage regulation, timing circuits, and in biasing circuits for transistors or other components. The 82KΩ value is often selected when a particular resistance is needed to set specific conditions in analog or digital circuits.
In summary, the 82K Ohm 1/4W 5% Through Hole Resistor is a widely-used component offering a reliable and cost-effective solution for controlling current in electronic circuits, with a resistance value of 82,000 ohms, a power rating of 0.25 watts, and a tolerance of 5%. Its through-hole mounting design makes it suitable for a broad range of electronic applications.
Min: 10 pcs
(0 review)
Min: 5 pcs
(0 review)
Mail: support@bluespaceinnovations.in
Call on: 011-49851163
Whatsapp us 8750500323
