011-49851163
8750500323
support@bluespaceinnovations.in
Here’s a detailed description for the 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF:
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for applications requiring accurate resistance and the ability to handle moderate power dissipation in both low-power and medium-power circuits. Built using Metal Oxide Film (MOF) technology, this resistor ensures excellent thermal stability, high voltage resistance, and reliable performance over time, even in demanding environments. Its 1% tolerance ensures tight precision, making it suitable for applications where accurate resistance values are critical.
This resistor has a 1,000 ohm (1kΩ) resistance, a commonly used value in a variety of circuits where moderate resistance is required for voltage regulation, current limiting, signal conditioning, and filtering applications. The 1kΩ resistance is especially useful in voltage dividers, biasing circuits, feedback loops, and RC filter networks. Its moderate resistance value allows it to perform well in power management and signal processing applications.
The 2W power rating indicates that this resistor can safely dissipate up to 2 watts of heat, making it suitable for medium-power applications. It is ideal for circuits where moderate amounts of power are dissipated but where lower power resistors might overheat or fail. This power rating allows the resistor to handle higher currents than smaller power-rated resistors without the risk of excessive heat buildup. Common applications for this resistor include voltage regulation, power supplies, LED drivers, and current-limiting circuits.
With a 1% tolerance, this resistor guarantees that the actual resistance will be within ±1% of the nominal value of 1kΩ. This level of precision is important for applications where high accuracy is required, such as in signal conditioning, voltage regulation, current sensing, or feedback networks. The 1% tolerance makes this resistor ideal for circuits where even small variations in resistance could affect the overall performance, such as in measurement systems, calibration circuits, and precision amplifiers.
This resistor features axial through-hole leads, meaning it has leads extending from both ends of the component that pass through holes in the printed circuit board (PCB) and are soldered on the other side. Through-hole mounting ensures mechanical strength, reliable electrical contact, and long-term durability. It is ideal for use in high-power circuits or where high-reliability and secure mounting are essential. The through-hole design also makes this resistor easy to handle and replace in prototyping, repair work, or maintenance.
The Metal Oxide Film (MOF) construction of this resistor offers numerous advantages over traditional carbon film resistors, such as lower thermal noise, superior voltage tolerance, and better resistance stability over temperature fluctuations. MOF resistors are highly durable and resistant to voltage surges, thermal stress, and mechanical damage, ensuring consistent performance in a variety of high-demand environments. The MOF construction is especially well-suited for medium-power circuits, voltage regulation, and precision applications where resistance stability is crucial.
Current Limiting: The 1kΩ resistor is ideal for use in current-limiting circuits, particularly in applications where moderate currents need to be regulated. It can be used in LED drivers, power supplies, or motor controllers to prevent excessive current from flowing through sensitive components. The 2W power rating ensures that it can handle moderate current flows without overheating, making it perfect for power management circuits.
Voltage Divider Networks: This resistor is commonly used in voltage divider networks to create specific voltage levels from a higher voltage source. By pairing with another resistor, the 1kΩ resistor allows the creation of precise voltage references, which is especially useful in sensor interfaces, voltage sensing, and analog-to-digital conversion (ADC) systems.
Signal Conditioning and Filtering: The 1kΩ resistor is frequently used in RC (Resistor-Capacitor) or RL (Resistor-Inductor) filter circuits to manage signal frequencies and attenuate unwanted noise. Its role in signal conditioning is critical for applications such as audio processing, RF (radio frequency) circuits, and analog signal filtering. The 2W power rating provides the necessary power handling for these applications, ensuring clean, undistorted signal processing.
Biasing Networks: In transistor biasing and op-amp circuits, the 1kΩ resistor is often used to set the operating points of transistors, diodes, and other active components. It is a critical element in setting the gain of amplifiers or establishing correct voltage levels in active circuit elements.
Feedback and Load Circuits: In feedback networks, especially in operational amplifier (op-amp) circuits, the 1kΩ resistor is used to control the gain and stability of the circuit. It helps maintain the desired signal integrity and is often used in voltage control loops, current sensing, and load balancing applications.
Power Supply Regulation: The 1kΩ resistor can be employed in power supply regulation circuits to regulate voltage levels or to limit current flow in DC-DC converters, linear regulators, and buck converters. It ensures that the voltage output remains stable and within acceptable limits for sensitive components.
The axial through-hole design of the 1kΩ 2W resistor makes it easy to handle, solder, and replace. This makes it an excellent choice for prototyping, testing, and field repairs. The long leads make the resistor easy to integrate into various PCB designs, and the durable MOF construction ensures it can withstand soldering stress and thermal cycling over time.
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for use in a wide range of electronic applications that require accuracy, moderate power dissipation, and long-term stability. With its 1% tolerance, 2W power rating, and Metal Oxide Film (MOF) construction, this resistor is perfect for voltage regulation, current limiting, signal conditioning, feedback networks, and biasing circuits. The axial through-hole mounting ensures reliable electrical connections and easy integration into PCB designs, while the MOF material provides resilience and high stability under various conditions.
This resistor is ideal for use in power supplies, signal processing circuits, voltage dividers, and current-sensing applications, offering precise resistance values and reliable performance in medium-power circuits.
Let me know if you need further details or examples on how this resistor could be applied!
₹ 414.00 ₹ 460.00
₹ 3,680.00 ₹ 4,600.00
Here’s a detailed description for the 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF:
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for applications requiring accurate resistance and the ability to handle moderate power dissipation in both low-power and medium-power circuits. Built using Metal Oxide Film (MOF) technology, this resistor ensures excellent thermal stability, high voltage resistance, and reliable performance over time, even in demanding environments. Its 1% tolerance ensures tight precision, making it suitable for applications where accurate resistance values are critical.
This resistor has a 1,000 ohm (1kΩ) resistance, a commonly used value in a variety of circuits where moderate resistance is required for voltage regulation, current limiting, signal conditioning, and filtering applications. The 1kΩ resistance is especially useful in voltage dividers, biasing circuits, feedback loops, and RC filter networks. Its moderate resistance value allows it to perform well in power management and signal processing applications.
The 2W power rating indicates that this resistor can safely dissipate up to 2 watts of heat, making it suitable for medium-power applications. It is ideal for circuits where moderate amounts of power are dissipated but where lower power resistors might overheat or fail. This power rating allows the resistor to handle higher currents than smaller power-rated resistors without the risk of excessive heat buildup. Common applications for this resistor include voltage regulation, power supplies, LED drivers, and current-limiting circuits.
With a 1% tolerance, this resistor guarantees that the actual resistance will be within ±1% of the nominal value of 1kΩ. This level of precision is important for applications where high accuracy is required, such as in signal conditioning, voltage regulation, current sensing, or feedback networks. The 1% tolerance makes this resistor ideal for circuits where even small variations in resistance could affect the overall performance, such as in measurement systems, calibration circuits, and precision amplifiers.
This resistor features axial through-hole leads, meaning it has leads extending from both ends of the component that pass through holes in the printed circuit board (PCB) and are soldered on the other side. Through-hole mounting ensures mechanical strength, reliable electrical contact, and long-term durability. It is ideal for use in high-power circuits or where high-reliability and secure mounting are essential. The through-hole design also makes this resistor easy to handle and replace in prototyping, repair work, or maintenance.
The Metal Oxide Film (MOF) construction of this resistor offers numerous advantages over traditional carbon film resistors, such as lower thermal noise, superior voltage tolerance, and better resistance stability over temperature fluctuations. MOF resistors are highly durable and resistant to voltage surges, thermal stress, and mechanical damage, ensuring consistent performance in a variety of high-demand environments. The MOF construction is especially well-suited for medium-power circuits, voltage regulation, and precision applications where resistance stability is crucial.
Current Limiting: The 1kΩ resistor is ideal for use in current-limiting circuits, particularly in applications where moderate currents need to be regulated. It can be used in LED drivers, power supplies, or motor controllers to prevent excessive current from flowing through sensitive components. The 2W power rating ensures that it can handle moderate current flows without overheating, making it perfect for power management circuits.
Voltage Divider Networks: This resistor is commonly used in voltage divider networks to create specific voltage levels from a higher voltage source. By pairing with another resistor, the 1kΩ resistor allows the creation of precise voltage references, which is especially useful in sensor interfaces, voltage sensing, and analog-to-digital conversion (ADC) systems.
Signal Conditioning and Filtering: The 1kΩ resistor is frequently used in RC (Resistor-Capacitor) or RL (Resistor-Inductor) filter circuits to manage signal frequencies and attenuate unwanted noise. Its role in signal conditioning is critical for applications such as audio processing, RF (radio frequency) circuits, and analog signal filtering. The 2W power rating provides the necessary power handling for these applications, ensuring clean, undistorted signal processing.
Biasing Networks: In transistor biasing and op-amp circuits, the 1kΩ resistor is often used to set the operating points of transistors, diodes, and other active components. It is a critical element in setting the gain of amplifiers or establishing correct voltage levels in active circuit elements.
Feedback and Load Circuits: In feedback networks, especially in operational amplifier (op-amp) circuits, the 1kΩ resistor is used to control the gain and stability of the circuit. It helps maintain the desired signal integrity and is often used in voltage control loops, current sensing, and load balancing applications.
Power Supply Regulation: The 1kΩ resistor can be employed in power supply regulation circuits to regulate voltage levels or to limit current flow in DC-DC converters, linear regulators, and buck converters. It ensures that the voltage output remains stable and within acceptable limits for sensitive components.
The axial through-hole design of the 1kΩ 2W resistor makes it easy to handle, solder, and replace. This makes it an excellent choice for prototyping, testing, and field repairs. The long leads make the resistor easy to integrate into various PCB designs, and the durable MOF construction ensures it can withstand soldering stress and thermal cycling over time.
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for use in a wide range of electronic applications that require accuracy, moderate power dissipation, and long-term stability. With its 1% tolerance, 2W power rating, and Metal Oxide Film (MOF) construction, this resistor is perfect for voltage regulation, current limiting, signal conditioning, feedback networks, and biasing circuits. The axial through-hole mounting ensures reliable electrical connections and easy integration into PCB designs, while the MOF material provides resilience and high stability under various conditions.
This resistor is ideal for use in power supplies, signal processing circuits, voltage dividers, and current-sensing applications, offering precise resistance values and reliable performance in medium-power circuits.
Let me know if you need further details or examples on how this resistor could be applied!
Here’s a detailed description for the 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF:
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for applications requiring accurate resistance and the ability to handle moderate power dissipation in both low-power and medium-power circuits. Built using Metal Oxide Film (MOF) technology, this resistor ensures excellent thermal stability, high voltage resistance, and reliable performance over time, even in demanding environments. Its 1% tolerance ensures tight precision, making it suitable for applications where accurate resistance values are critical.
This resistor has a 1,000 ohm (1kΩ) resistance, a commonly used value in a variety of circuits where moderate resistance is required for voltage regulation, current limiting, signal conditioning, and filtering applications. The 1kΩ resistance is especially useful in voltage dividers, biasing circuits, feedback loops, and RC filter networks. Its moderate resistance value allows it to perform well in power management and signal processing applications.
The 2W power rating indicates that this resistor can safely dissipate up to 2 watts of heat, making it suitable for medium-power applications. It is ideal for circuits where moderate amounts of power are dissipated but where lower power resistors might overheat or fail. This power rating allows the resistor to handle higher currents than smaller power-rated resistors without the risk of excessive heat buildup. Common applications for this resistor include voltage regulation, power supplies, LED drivers, and current-limiting circuits.
With a 1% tolerance, this resistor guarantees that the actual resistance will be within ±1% of the nominal value of 1kΩ. This level of precision is important for applications where high accuracy is required, such as in signal conditioning, voltage regulation, current sensing, or feedback networks. The 1% tolerance makes this resistor ideal for circuits where even small variations in resistance could affect the overall performance, such as in measurement systems, calibration circuits, and precision amplifiers.
This resistor features axial through-hole leads, meaning it has leads extending from both ends of the component that pass through holes in the printed circuit board (PCB) and are soldered on the other side. Through-hole mounting ensures mechanical strength, reliable electrical contact, and long-term durability. It is ideal for use in high-power circuits or where high-reliability and secure mounting are essential. The through-hole design also makes this resistor easy to handle and replace in prototyping, repair work, or maintenance.
The Metal Oxide Film (MOF) construction of this resistor offers numerous advantages over traditional carbon film resistors, such as lower thermal noise, superior voltage tolerance, and better resistance stability over temperature fluctuations. MOF resistors are highly durable and resistant to voltage surges, thermal stress, and mechanical damage, ensuring consistent performance in a variety of high-demand environments. The MOF construction is especially well-suited for medium-power circuits, voltage regulation, and precision applications where resistance stability is crucial.
Current Limiting: The 1kΩ resistor is ideal for use in current-limiting circuits, particularly in applications where moderate currents need to be regulated. It can be used in LED drivers, power supplies, or motor controllers to prevent excessive current from flowing through sensitive components. The 2W power rating ensures that it can handle moderate current flows without overheating, making it perfect for power management circuits.
Voltage Divider Networks: This resistor is commonly used in voltage divider networks to create specific voltage levels from a higher voltage source. By pairing with another resistor, the 1kΩ resistor allows the creation of precise voltage references, which is especially useful in sensor interfaces, voltage sensing, and analog-to-digital conversion (ADC) systems.
Signal Conditioning and Filtering: The 1kΩ resistor is frequently used in RC (Resistor-Capacitor) or RL (Resistor-Inductor) filter circuits to manage signal frequencies and attenuate unwanted noise. Its role in signal conditioning is critical for applications such as audio processing, RF (radio frequency) circuits, and analog signal filtering. The 2W power rating provides the necessary power handling for these applications, ensuring clean, undistorted signal processing.
Biasing Networks: In transistor biasing and op-amp circuits, the 1kΩ resistor is often used to set the operating points of transistors, diodes, and other active components. It is a critical element in setting the gain of amplifiers or establishing correct voltage levels in active circuit elements.
Feedback and Load Circuits: In feedback networks, especially in operational amplifier (op-amp) circuits, the 1kΩ resistor is used to control the gain and stability of the circuit. It helps maintain the desired signal integrity and is often used in voltage control loops, current sensing, and load balancing applications.
Power Supply Regulation: The 1kΩ resistor can be employed in power supply regulation circuits to regulate voltage levels or to limit current flow in DC-DC converters, linear regulators, and buck converters. It ensures that the voltage output remains stable and within acceptable limits for sensitive components.
The axial through-hole design of the 1kΩ 2W resistor makes it easy to handle, solder, and replace. This makes it an excellent choice for prototyping, testing, and field repairs. The long leads make the resistor easy to integrate into various PCB designs, and the durable MOF construction ensures it can withstand soldering stress and thermal cycling over time.
The 1K Ohm (1kΩ) 2W 1% Axial Through Hole Resistor - MOF is a high-precision, medium-power resistor designed for use in a wide range of electronic applications that require accuracy, moderate power dissipation, and long-term stability. With its 1% tolerance, 2W power rating, and Metal Oxide Film (MOF) construction, this resistor is perfect for voltage regulation, current limiting, signal conditioning, feedback networks, and biasing circuits. The axial through-hole mounting ensures reliable electrical connections and easy integration into PCB designs, while the MOF material provides resilience and high stability under various conditions.
This resistor is ideal for use in power supplies, signal processing circuits, voltage dividers, and current-sensing applications, offering precise resistance values and reliable performance in medium-power circuits.
Let me know if you need further details or examples on how this resistor could be applied!
Min: 10 pcs
(0 review)
Min: 10 pcs
(0 review)
Min: 2 pcs
(0 review)
Mail: support@bluespaceinnovations.in
Call on: 011-49851163
Whatsapp us 8750500323
