011-49851163
8750500323
support@bluespaceinnovations.in
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor is a versatile and widely used electronic component suitable for low-power applications. Its design provides reliable performance for current-limiting, voltage regulation, and other general-purpose tasks in electronic circuits. Below are its detailed specifications and common applications:
Resistance Value: 56 ohms
This resistor provides a resistance of 56 ohms, making it ideal for applications that require slightly higher current limiting or voltage drop control compared to 47-ohm resistors. It is commonly used in low-power circuits to regulate current flow or as part of a voltage divider network.
Power Rating: 1/4 watt (0.25W)
The resistor can safely dissipate up to 1/4 watt (0.25W) of power without overheating. Its power rating makes it well-suited for low-power applications, including small power supplies, audio circuits, and signal processing systems.
Tolerance: ±5%
The resistor’s actual resistance can vary by up to ±5% from its nominal value of 56 ohms. This means the resistance could range from 53.2 ohms to 58.8 ohms. Such tolerance is typical for general-purpose resistors in applications where precise resistance values are not critical.
Mounting Type: Through hole
With leads designed to pass through PCB holes, this resistor is easy to solder and mount securely. Through-hole mounting ensures excellent mechanical stability, making it a reliable choice for prototyping and production environments.
Material: Copper Wire
Constructed from copper wire, the resistor offers good electrical conductivity and cost-effectiveness, making it ideal for low-power circuits prioritizing efficiency and reliability.
56 Ohms Resistance:
Perfect for applications requiring moderate resistance to regulate current or voltage, such as LED circuits, basic filtering, or voltage divider networks.
1/4W Power Rating:
Its power dissipation capacity of 1/4 watt ensures suitability for low-power circuits, making it ideal for devices operating at low voltages and currents.
5% Tolerance:
The ±5% tolerance is sufficient for general-purpose applications where precise resistance is not critical but consistency and reliability are required.
Copper Wire Construction:
Copper construction provides good conductivity and cost efficiency, ensuring the resistor is a dependable choice for low-power, non-critical circuits.
Current Limiting:
The 56-ohm resistor can limit current flow in circuits, protecting LEDs, motors, or other components from excessive current.
Voltage Division:
Commonly used in voltage divider circuits, this resistor can help reduce voltage levels to suit specific components or circuits, such as signal conditioning or sensor interfacing.
Filtering and Signal Control:
In combination with capacitors or inductors, the 56-ohm resistor can help filter signals, reduce noise, or shape waveforms in low-frequency circuits.
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor combines moderate resistance, compact size, and cost-effectiveness, making it a reliable and versatile component for a wide range of electronics projects and professional applications.
₹ 45.00 ₹ 50.00
₹ 212.50 ₹ 250.00
₹ 2,000.00 ₹ 2,500.00
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor is a versatile and widely used electronic component suitable for low-power applications. Its design provides reliable performance for current-limiting, voltage regulation, and other general-purpose tasks in electronic circuits. Below are its detailed specifications and common applications:
Resistance Value: 56 ohms
This resistor provides a resistance of 56 ohms, making it ideal for applications that require slightly higher current limiting or voltage drop control compared to 47-ohm resistors. It is commonly used in low-power circuits to regulate current flow or as part of a voltage divider network.
Power Rating: 1/4 watt (0.25W)
The resistor can safely dissipate up to 1/4 watt (0.25W) of power without overheating. Its power rating makes it well-suited for low-power applications, including small power supplies, audio circuits, and signal processing systems.
Tolerance: ±5%
The resistor’s actual resistance can vary by up to ±5% from its nominal value of 56 ohms. This means the resistance could range from 53.2 ohms to 58.8 ohms. Such tolerance is typical for general-purpose resistors in applications where precise resistance values are not critical.
Mounting Type: Through hole
With leads designed to pass through PCB holes, this resistor is easy to solder and mount securely. Through-hole mounting ensures excellent mechanical stability, making it a reliable choice for prototyping and production environments.
Material: Copper Wire
Constructed from copper wire, the resistor offers good electrical conductivity and cost-effectiveness, making it ideal for low-power circuits prioritizing efficiency and reliability.
56 Ohms Resistance:
Perfect for applications requiring moderate resistance to regulate current or voltage, such as LED circuits, basic filtering, or voltage divider networks.
1/4W Power Rating:
Its power dissipation capacity of 1/4 watt ensures suitability for low-power circuits, making it ideal for devices operating at low voltages and currents.
5% Tolerance:
The ±5% tolerance is sufficient for general-purpose applications where precise resistance is not critical but consistency and reliability are required.
Copper Wire Construction:
Copper construction provides good conductivity and cost efficiency, ensuring the resistor is a dependable choice for low-power, non-critical circuits.
Current Limiting:
The 56-ohm resistor can limit current flow in circuits, protecting LEDs, motors, or other components from excessive current.
Voltage Division:
Commonly used in voltage divider circuits, this resistor can help reduce voltage levels to suit specific components or circuits, such as signal conditioning or sensor interfacing.
Filtering and Signal Control:
In combination with capacitors or inductors, the 56-ohm resistor can help filter signals, reduce noise, or shape waveforms in low-frequency circuits.
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor combines moderate resistance, compact size, and cost-effectiveness, making it a reliable and versatile component for a wide range of electronics projects and professional applications.
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor is a versatile and widely used electronic component suitable for low-power applications. Its design provides reliable performance for current-limiting, voltage regulation, and other general-purpose tasks in electronic circuits. Below are its detailed specifications and common applications:
Resistance Value: 56 ohms
This resistor provides a resistance of 56 ohms, making it ideal for applications that require slightly higher current limiting or voltage drop control compared to 47-ohm resistors. It is commonly used in low-power circuits to regulate current flow or as part of a voltage divider network.
Power Rating: 1/4 watt (0.25W)
The resistor can safely dissipate up to 1/4 watt (0.25W) of power without overheating. Its power rating makes it well-suited for low-power applications, including small power supplies, audio circuits, and signal processing systems.
Tolerance: ±5%
The resistor’s actual resistance can vary by up to ±5% from its nominal value of 56 ohms. This means the resistance could range from 53.2 ohms to 58.8 ohms. Such tolerance is typical for general-purpose resistors in applications where precise resistance values are not critical.
Mounting Type: Through hole
With leads designed to pass through PCB holes, this resistor is easy to solder and mount securely. Through-hole mounting ensures excellent mechanical stability, making it a reliable choice for prototyping and production environments.
Material: Copper Wire
Constructed from copper wire, the resistor offers good electrical conductivity and cost-effectiveness, making it ideal for low-power circuits prioritizing efficiency and reliability.
56 Ohms Resistance:
Perfect for applications requiring moderate resistance to regulate current or voltage, such as LED circuits, basic filtering, or voltage divider networks.
1/4W Power Rating:
Its power dissipation capacity of 1/4 watt ensures suitability for low-power circuits, making it ideal for devices operating at low voltages and currents.
5% Tolerance:
The ±5% tolerance is sufficient for general-purpose applications where precise resistance is not critical but consistency and reliability are required.
Copper Wire Construction:
Copper construction provides good conductivity and cost efficiency, ensuring the resistor is a dependable choice for low-power, non-critical circuits.
Current Limiting:
The 56-ohm resistor can limit current flow in circuits, protecting LEDs, motors, or other components from excessive current.
Voltage Division:
Commonly used in voltage divider circuits, this resistor can help reduce voltage levels to suit specific components or circuits, such as signal conditioning or sensor interfacing.
Filtering and Signal Control:
In combination with capacitors or inductors, the 56-ohm resistor can help filter signals, reduce noise, or shape waveforms in low-frequency circuits.
The 56 Ohm 1/4W 5% Copper Wire Through Hole Resistor combines moderate resistance, compact size, and cost-effectiveness, making it a reliable and versatile component for a wide range of electronics projects and professional applications.
Mail: support@bluespaceinnovations.in
Call on: 011-49851163
Whatsapp us 8750500323
